BVM PNP VIPER Construction And Operating Manual page 10

Inject a small amount of axle Super
Lube (BVM#5784) into the wheel
bushing and onto the axle. Note the thin
Teflon washers and reinstall them as
they were factory placed.
Reassemble everything, making sure
the clear brake tubing is on the aft side
of strut. Securely tighten the axle
retaining bolt with a 2.5mm Hex Wrench.
A variable speed electric drill with a
Phillips head driver is handy to remove
and reinstall the (6) screws that hold the
retract unit in place.
BVM®2017 9 06/20/2017