Wing Servos - BVM PNP VIPER Construction And Operating Manual

WING SERVOS

All of the servos in the model are the Spark
all metal case brushless motor #20.
They are securely mounted to the injection
molded cover plates. A 2.5mm hex wrench
secures the metal drive arm to the servo
output shaft.
You can use a 2.0mm hex wrench to
check the security of the
nylon/aluminum ball/socket linkages.
The nylon/aluminum ball/socket linkages
can receive a bit of BVM Dry Lube (BVM
#1947) applied to the mating parts.
Do this for all similar linkages on the
model.
BVM®2017 10 06/20/2017