Single-Ended Inputs - Photon Focus MV1-D1280 Series User Manual

6.5.2 Single-ended Inputs

ISO_IN0 and ISO_IN1 are single-ended isolated inputs. The input circuit of both inputs is
identical (see Fig. 6.3).
Fig. 6.5 shows a direct connection to the ISO_IN inputs.
In the camera default settings the PLC is configured to connect the ISO_IN0 to
the PLC_Q4 camera trigger input. This setting is listed in Section 7.8.2.
I n p u t V o l t a g e
M a x . + 3 0 V D C
M i n . - 3 0 V D C
Y O U R _ G N D
Figure 6.5: Direct connection to ISO_IN
Fig. 6.6 shows how to connect ISO_IN to TTL logic output device.
C o n t r o l L o g i c
Y O U R _ V C C
+
&
Y O U R _ G N D
Figure 6.6: Connection to ISO_IN from a TTL logic device
.
MAN061 12/2018 V1.3
1 2 p o l . H i r o s e
C o n n e c t o r
7
I S O _ I N 0
1 2
Y O U R _ G N D
I S O _ G N D
1 2 p o l . H i r o s e
C o n n e c t o r
7
I S O _ I N 0
1 2
Y O U R _ G N D
I S O _ G N D
6.5 Trigger and Strobe Signals for GigE Cameras
I S O _ V C C
+
1 0 k
e n h a n c e d
P o w e r F E T
4 . 7 V
I S O _ G N D
1 S O _ G N D
I S O _ V C C
+
1 0 k
e n h a n c e d
P o w e r F E T
4 . 7 V
1 S O _ G N D I S O _ G N D
C a m e r a
C a m e r a
67 of 103