Photon Focus MV1-D1280 Series User Manual page 100

A Pinouts
Pin I/O Type Name
1 PWR CAMERA_GND
2 PWR CAMERA_PWR
3 O ISO_OUT0
4 I ISO_INC0_N
5 I ISO_INC0_P
6 PWR ISO_PWR
7 I ISO_IN0
8 O ISO_OUT1 (MISC)
9 I ISO_IN1(Trigger IN)
10 I ISO_INC1_N
11 I ISO_INC1_P
12 PWR ISO_GND
Table A.2: Power supply connector pin assignment
100 of 103
Description
Camera GND, 0V
Camera Power 12V..24V
Default Strobe out, internally Pulled up to ISO_PWR
with 4k7 Resistor
INC0 differential input (G2: RS-422, H2: HTL),
negative polarity
INC0 differential input (G2: RS-422, H2: HTL), positive
polarity
Power supply 5V..24V for output signals
IN0 input signal
Q1 output from PLC, no Pull up to ISO_PWR ; can be
used as additional output (by adding Pull up) or as
controllable switch (max. 100mA, no capacitive or
inductive load)
Default Trigger IN
INC1 differential input (G2: RS-422, H2: HTL),
negative polarity
INC1 differential input (G2: RS-422, H2: HTL), positive
polarity
I/O GND, 0V
MAN061 12/2018 V1.3