Photon Focus MV1-D1280 Series User Manual page 45

AcquisitionMode
Continuous
SingleFrame
MultiFrame
SingleFrameRecording
SingleFrameReadout
ContinuousRecording
ContinousReadout
Table 5.7: AcquisitionMode and Trigger
MAN061 12/2018 V1.3
After the command AcquisitionStart is executed:
Camera aquires image frames continuously. Acquisition can be
stopped by executing AcquisitionStop command.
Camera acquires one frame and acquisition stops.
Camera acquires n=AcquisitionFrameCount frames and acquisition
stops.
Camera saves one image on the on-board memory of the IP engine.
One image is acquired from the IP engine's on-board memory. The
image must have been saved in the SingleFrameRecording mode.
Camera continuosly saves images on the on-board memory of the
IP engine until the memory is full. The size of available on-board
memory is 24 MB.
All Images that have been previously saved by the
ContinuousRecording mode are acquired from the IP engine's
on-board memory.
5.2 Trigger and Strobe
45 of 103