ED5000N (S)(A) Series Exit Device
7) Installation Instructions (Continued)
4.
Install Exit Device:
a. Seat device against door being careful to align vertical trim tailpiece to engage with
cross hole of device cam.
b. Fasten device to trim assembly using (2) 1/4-20 pan head screws.
c. Follow instructions packed with device to secure device to door.
d. Tighten all 4 screws.
Inside Face
of Door
Fig. 4b
Fig. 4a
Fig. 4c
Copyright © 2018 Corbin Russwin, Inc. All rights reserved.
Reproduction in whole or in part without the express written
10
permission of Corbin Russwin, Inc. is prohibited.