Before You First Use Your Appliance - Kernau KBO 1066 S PT B Operation Manual

Before you first use your appliance:

• Remove packaging, clean interior from any residual preservation substances,
• Remove any accessories and wash them in warm water with detergent,
• Turn on ventilation or open a window,
• Turn the function knob into top+bottom or ring heater+fan function (see: Function
selector and oven control),
• Perform an initial burn in (250°C, 30 minutes), remove any dirt and clean thoro-
ATTENTION
Remove security tape from telescopic runners before burn in.
Knobs are "hidden" inside of the control panel. To select a function, you should:
1. Gently push the knob and let it free,
2. Select desired function by turning the
knob. Programs are indicated on the
knob
.
ATTENTION
If the oven is equipped with electronic timer, it will display flashing 0:00 time after
firstly plugging it in.
Current time should be programmed (see- Timer instruction manual attached
to this document). Oven will not operate without the time set.
IMPORTANT
Electronic timer is equipped with touch sensors which are operated by touching mar-
ked places on the control panel. Every registered touch is indicated by a sound. Sen-
sor surfaces should be kept clean.
IMPORTANT
Oven cavity should be cleaned only with warm water with washing-up liquid.
USAGE
1
1
2
EN
38
2