Sony STR-DN1010 Service Manual page 2

STR-DN1010
1)
Measured under the following conditions:
Area code Power requirements
US, CND 120 V AC, 60 Hz
UK, ECE, AUS 230 V AC, 50 Hz
2)
Reference power output for front, center,
surround, surround back and front high speakers.
Depending on the sound field settings and the
source, there may be no sound output.
Frequency response
Analog 10 Hz – 70 kHz,
+0.5 dB/–2 dB (with sound
field and equalizer
bypassed)
Input
Analog Sensitivity: 500 mV/
50 kohms
3)
S/N : 96 dB
4)
(A, 500 mV
Digital (Coaxial) Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
Digital (Optical) S/N: 100 dB
(A, 20 kHz LPF)
Output (Analog)
AUDIO OUT Voltage: 500 mV/10 kohms
SUBWOOFER Voltage: 2 V/1 kohm
Equalizer
Gain levels ±10 dB, 1 dB step
3)
INPUT SHORT (with sound field and equalizer
bypassed).
4)
Weighted network, input level.
FM tuner section
Tuning range 87.5 MHz – 108.0 MHz
Antenna (aerial) FM wire antenna (aerial)
Antenna (aerial) terminals
75 ohms, unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
Area code Tuning scale
10 kHz step
US, CND 530 kHz –
1,710 kHz
UK, ECE, AUS –
Antenna (aerial) Loop antenna (aerial)
Intermediate frequency
450 kHz
2
Video section
Inputs/Outputs
Video:
COMPONENT VIDEO:
HDMI Video
Input/Output (HDMI Repeater block)
640 × 480p@60 Hz
720 × 480p@59.94/60 Hz
1280 × 720p@59.94/60 Hz
1920 × 1080i@59.94/60 Hz
1920 × 1080p@59.94/60 Hz
720 × 576p@50 Hz
1280 × 720p@50 Hz
1920 × 1080i@50 Hz
1920 × 1080p@50 Hz
1920 × 1080p@24 Hz
)
HDMI Video (3D)
Input/Output (HDMI Repeater block)
1280 × 720p@59.94/60 Hz Frame packing
1920 × 1080i@59.94/60 Hz Frame packing
1920 × 1080i@59.94/60 Hz Side-by-Side (Half)
1920 × 1080p@59.94/60 Hz Side-by-Side (Half)
1280 × 720p@50 Hz Frame packing
1920 × 1080i@50 Hz Frame packing
1920 × 1080i@50 Hz Side-by-Side (Half)
1920 × 1080p@50 Hz Side-by-Side (Half)
1920 × 1080p@24 Hz Frame packing
General
Power requirements
Area code
US, CND
ECE, UK
AUS
Power output (DIGITAL MEDIA PORT)
DC OUT:
Power consumption
Area code
US, CND, UK
ECE, AUS
9 kHz step
531 kHz –
Power consumption (during standby mode)
1,710 kHz
531 kHz –
1,602 kHz
Dimensions (width/height/depth) (Approx.)
Mass (Approx.)
1 Vp-p, 75 ohms
Y: 1 Vp-p, 75 ohms
P /C : 0.7 Vp-p, 75 ohms
B B
P /C : 0.7 Vp-p, 75 ohms
R R
80 MHz HD Pass Through
Power requirements
120 V AC, 60 Hz
230 V AC, 50/60 Hz
230 V AC, 50 Hz
5V, 0.7A MAX
Power consumption
250 W
0.9 W (When "Ctrl for
HDMI" and "S-AIR Stby"
are set to "OFF")
17 in × 6 1/4 in × 12 7/8 in
(430 mm × 157.5 mm ×
324.5 mm) including
projecting parts and
controls
18 lb 16 oz (8.6 kg)
Supplied accessories
Operating Instructions
Quick Setup Guide
GUI Menu List
FM wire antenna (aerial) (1)
AM loop antenna (aerial) (1)
Remote commander (1)
– RM-AAP051 (Models of area code US,
CND only)
– RM-AAP052 (Models of area code ECE,
UK, AUS only)
R6 (size-AA) batteries (2)
Optimizer microphone (ECM-AC2) (1)
Design and specifications are subject to
change without notice.
Halogenated flame retardants are not used in
the certain printed wiring boards.
Abbrevation
AUS : Australian model
CND : Canadian model
ECE : Continental European, East European
and Russian models