KitchenAid 4-C Recipes & Instructions page 52

TO ATTACH AND ASSEMBLE:
Looen Attachment Knob. Insert Shaft
Housing (1) into the Attachment Hub
(2) and tighten Knob. Please see Use
and Care Guide, pages 33, 38-39.
Attach Shaft (3) to desired Cone.
Insert square end of Shaft (4) in square
opening of Housing (5) and tighten by
turning Cone clockwise.
TO CHANGE CONES:
The Latch (6) must be raised to
remove Cone unit. Cones may be easily
changed by inserting square end of
Shaft (4) in square opening (5) and
turning counterclockwise.
Insert Cone unit into Housing so that
Shaft fits into square Hub Socket. The
Cone unit is automatically locked into
position with Latch (6).
TO USE:
To use Slicer/Shredder, lift the Handle
of the Hopper Plate (7) and drop food
in the Hopper. Turn to Speed 4 and
push down lightly on Handle. Catch
the food in the Bowl or any other-deep
bowl. Never use fingers or a spoon to
depress the food. Always use the
Hopper Plate, holding it by the Handle
(8).
SEE REVERSE SIDE