KitchenAid 4-C Recipes & Instructions page 5

UNDERSTANDING YOUR FOOD PREPARER
MODEL 4-C
Your new 4-C Food Preparer comes equipped with a 4-quart glass Bowl and an All-purpose
Beater. A Dough Hook is not available for the 4-C model.
All-purpose Beater. . . is used for all mixing processes. Do not
attempt to knead yeast breads in this Food Preparer.
1. Speed Control Knob—acts as both
an "on" and "off" switch and
regulates speed of Beater.
2. Motor Head—lift for attaching
and removing Bowl and Beater.
3. Speed Guide and Handle
4. Attachment Hub (See page 33)
5. Knob for securing attachments
6. Beater Shaft—attach All-purpose
Beater here
7. Heat Resistant Glass Bowl—
(Stainless steel Bowl available as
an optional accessory.)
8. Bowl Clamping Plate
TO ATTACH BOWL...
Be sure Speed Control (1) is OFF. Tilt back Motor Head
(2), set Bowl (7) on Bowl Clamping Plate (8) and turn
Bowl gently in a clockwise direction.
TO REMOVE BOWL...
Turn Speed Control to OFF and tilt Motor Head back.
Turn Bowl in a counterclockwise direction.
TO ATTACH AND REMOVE ALL-PURPOSE BEATER
Turn Speed Control to OFF and raise Motor Head. Slip
Beater onto Beater Shaft (6) and press upward as far as
possible. Turn Beater to right, hooking Beater over Pin
(9) on Shaft. To remove. . . press Beater upward as far as
possible and turn to left. Pull Beater from Beater Shaft.
TO CONTROL SPEED...
The Speed Control Knob turns motor "on" and "off" and
regulates steed of Beater. Speed Control should always
be set on lowest speed for starting, then gradually
moved to desired higher speed setting to avoid splash-
ing ingredients out of Bowl. Speed Guide (3) gives the
proper speed settings for various mixing operations. See
page 5 for more detailed Speed Guide information.
2