KitchenAid 4-C Recipes & Instructions page 40

TO ATTACH AND ASSEMBLE:
Loosen Attachment Knob. Insert Shaft
Housing (1) into the Attachment Hub
(2) and tighten Knob. Please read
general instructions, page 33.
Insert Cone unit into Housing so that
Shaft fits into square Hub Socket. The
Cone unit is automatically locked into
position with Latch (6).
SLICER AND SHREDDER
ROTOR TYPE
Attach Shaft (3) to desired Cone.
TO USE:
To use Slicer/Shredder, lift the Handle of
the Hopper Plate (7) and drop food in the
Hopper. Turn to Speed 4 and push down
lightly on Handle. Catch the food in the
Bowl or any other deep bowl.
Never use fingers or a spoon to depress the
food. Always use the Hopper Plate, holding
it by the Handle (8).
Insert square end of Shaft
(4)
in square
opening of Housing (5) and tighten by turn-
ing Cone clockwise. IMPORTANT SAFE-
GUARD: blades are sharp; handle carefully.
Illustration A
38