Care And Maintenance - Labomed PRIMA Mm User Manual

CARE AND MAINTENANCE

• Protect it from improper handling. Never install other devices sockets or unscrew optical system and
mechanical parts unless explicitly instructed to do so in this manual.
• Protect the microscope from oil and grease. Never oil or grease the guide surfaces or mechanical
parts.
• Remove coarse contamination using a damp disposable cloth.
• Use disinfectants refered as in section 16 (cleaning & disinfection) of this user guide.
• Use special optics cleaning cloths and pure alcohol for cleaning lenses and eyepieces.
• Clean optical components using a lint-free cloth. Soak the cloth using a little methanol or Glass clean
-er.Do not use ethanol and spirit.
• LABOMED Max Lite coating are fungal resistant. If you clean as described above, the coatings
will not be damaged.
• If cleaning and disinfection is done as described insection 16 is no impact of multiple cleaning/
Disinfection on mechanical and optical parts. Paints & Coating are rigid and life long.
TROPICAL ENVIRONMENT/FUNGUS:
LABOMED employs certain safety precaution in its manufacturing techniques and materials. other
preventive measures include:
• Keep optical parts clean.
• Use and store them in a clean environment only.
• Store under UV light when not in use.
• Use in continuously climate-controlled rooms only.
• Keep moisture away using silica gel and cover with a plastic cover.
OCCUPATIONAL SAFETY AND HEALTH PROTECTION:
Observe work safety and health protection of persons responsible for processing contaminated prod-
ucts.
Current regulation of hospital hygiene and prevention of infection must be observed in the prepara-
tion, cleaning and disinfection of the products.
INSTRUCTIONS
WORKPLACE:
Remove surface contamination with a paper towel.
REPROCESSING:
Recommended reprocess a product immediately after use or as & when required as per below
cleaning instructions.
6210000-795
Prima Mµ
Prima Mµ
20
Issue 1.6
Printed on Jan.,2021