emmeti CTTS RF User Manual page 44

At this point the programmable
thermostat will begin to operate
with the set default parameters
(see page 33) displaying the
day of the week, the time, the
environment temperature and the
graphic of the program on.
When CTTS RF sends an on or off
command to the remote actuator,
icon (field 2) lights for a
moment.
Attention:
To operate correctly the programmable thermostat requires the time and date
insertion.
If once mains powered, no value is
set within about 30 seconds, the
programmable thermostat begins
to operate in off mode, displayed
with the symbol
is displayed with flashing dashes
( _ _:_ _ ).
The programmable thermostat remains in off operation condition until when
the hour is not inserted, ensuring in this way the saving of the antifreeze
temperature (6°C).
In this condition, the pressure of any key reactivates the menu of date/time
insertion for other 30 seconds about.
HOUR
. The time lack
CTTS RF Radiofrequency digital programmable thermostat User Manual
DAY
PROGRAM
GRAPHIC
- 10 -
TEMPERATURE