emmeti CTTS RF User Manual page 52

Regulation parameters
In case of on/ off regulation the only parameter to set is the hysteresis (
can have values between 0.1°C e 1°C.
In case of proportional regulation the parameters to set are the regulation band (
il periodo di regolazione (
For further information about how to choose these values see the chapter For further information about how to choose these values see the chapter
"Regulation types" on page 24. "Regulation types" on page 24.
But remember that the preset settings are suitable for the most part of the But remember that the preset settings are suitable for the most part of the
situations: to change these settings only if it's really necessary. situations: to change these settings only if it's really necessary.
Antifreeze temperature (only for heating mode)
For the heating mode it's possible to set a safety
temperature (antifreeze temperature –
maintain also if the programmable thermostat is
switched off.
It's possible to choose a value between 1°C and
50°C. It's also possible to deactivate the antifreeze
function pressing the key
shows " ". In this case, if the programmable
thermostat is switched off, no safety temperature
is maintained.
"Open window" function - Fin (only for heating operation)
The "Fin" menu allows to enable (
( ) the "open window" function. If the function
is active, it is necessary to set the intervention
sensitivity and the duration of the switching off.
).
until the display
) or disable
CTTS RF Radiofrequency digital programmable thermostat User Manual
) to
- 18 -
), which
) e