emmeti CTTS RF User Manual page 46

to Friday and P2 on Saturday and on Sunday (the programs profile is described at the
end of this manual on page 34-35).
If this programming doesn't satisfy the user needs it' s possible to change it.
To modify the programming:
1. From the normal operation display, press for a long time the key
symbol starts flashing on field (2)
2. Press for a short time the key
to access the parameters modification.
3. The programs page is displayed:
the first day of the week (DAY 1) flashing,
the current program (for example P1) of the
current operating mode (
corresponding profile of the program.
3.1. If the set program is good, move to the
next day with the keys
3.2. If the set program is not good, press
the key .
The set program flashes: choose a
different program among the 7 available
programs pressing the keys
3.2.1. If no program exactly satisfies the
user's needs, choose any program
which best meet them and
press the key
modification of the program profile.
On field (3)
on field (7) flashes the temperature
level (T1, T2 o T3) set for that
specific time (00:00).
until the symbol
o ) and the
and
and
to access the
appears while
CTTS RF Radiofrequency digital programmable thermostat User Manual
flashes and press the key
.
.
- 12 -
until the