Download Print this page
emmeti CS-17 Installation Instructions

emmeti CS-17 Installation Instructions

Zona touch - touchscreen programmable thermostat

Advertisement

Quick Links

CS-17 Zona Touch - Touchscreen Programmable Thermostat
Buttons and LCD Display
Button / Icon
Description
Turning on/off
thermostat
Menu and
program button
Set time and
weekday / Confirm
settings
Increase the set
value
Decrease the set
value
Key Lock

Configuration Menu

To enter the settings menu please follow the steps below:
Step 1: Turn the thermostat off by pressing
Step 2: Press
for 3 seconds, you will then see menu 01.
Step 3: Use the up and down arrows to adjust the 'sensor
selection' which is in menu 01 (air sensing, air
remote, floor remote or air and floor).
Step 4: Press
to cycle through the configuration menus.
Step 5: Press
to accept and store.
For more information please call us on 01993 824900 or view our website at www.emmeti.co.uk

Installation Instructions

Button / Icon
Description
Programmed
operation
Temporary
override
Holiday mode
Frost protection
Program number
Call for heat
.
Button / Icon
Description
Internal air sensing
Remote air
sensing
Remote floor
sensing
Internal air sensing
with remote floor
sensing cut off
1

Advertisement

loading

Summary of Contents for emmeti CS-17

  • Page 1: Installation Instructions

    01 (air sensing, air remote, floor remote or air and floor). Step 4: Press to cycle through the configuration menus. Step 5: Press to accept and store. For more information please call us on 01993 824900 or view our website at www.emmeti.co.uk...
  • Page 2 Hidden Menu Limit minimum setpoint C - 20 Limit maximum setpoint C - 35 Hold ‘down’ Factory Reset arrow for 5 seconds For more information please call us on 01993 824900 or view our website at www.emmeti.co.uk...
  • Page 3: Holiday Function

    In manual mode, the thermostat maintains a constant set temperature manually set by the user. In auto mode the thermostat follows the programmed schedule. For more information please call us on 01993 824900 or view our website at www.emmeti.co.uk...
  • Page 4: Installation And Wiring

    230V AC Sensor used Fig. 6. This product should be installed by a qualified Fig. 1. Fig. 2. electrician Fig. 3. Fig. 4. Fig. 5. For more information please call us on 01993 824900 or view our website at www.emmeti.co.uk...