AJAX Tag User Manual page 8

Binding a Tag or Pass to a user
When a Tag or Pass is linked to a user, it fully inherits the rights to manage the user's
security modes. For example, if a user was able to manage only one group, then the bound
Tag or Pass will have the right to manage only this group.
One user can bind any number of Tag or Pass devices within the limit of contactless identi cation
devices connected to the hub.
User rights and permissions are stored in the hub. After being bound to a user, Tag and
Pass represent the user in the system if devices are bound to the user. Therefore, when
changing user rights, you do not need to make changes to the Tag or Pass settings — they
are applied automatically.
To bind a Tag or Pass to a user, in the Ajax app:
1. Select the required hub if there are several hubs in your account.
2. Go to the Devices
3. Select Passes/Tags.
menu.
2. Select the Delete without pass/tag option and
follow the app's instructions.
In both cases you don't delete the hub from Tag/Pass
memory. To clear the device memory you should reset
it (all data from Tag/Pass will be erased)