AJAX Tag User Manual page 6

If you try to bind a Tag or Pass to a hub that has already reached the hub limit (13 hubs are
bound to them), you will receive a corresponding noti cation. To bind such a Tag or Pass to
a new hub, you will need to reset it (all data from tag/pass will be erased).
How to reset a Tag or Pass
States
The states include information about the device and its operating parameters. Tag or Pass
states can be found in the Ajax app:
1. Go to the Devices
2. Select Passes/Tags.
3. Select the required Tag or Pass from the list.
Parameter
User
Active
Identi er
Setting up
Tag and Pass are con gured in the Ajax app:
1. Go to the Devices
2. Select Passes/Tags.
3. Select the required Tag or Pass from the list.
4. Go to Settings by clicking on the
Please note that after changing the settings, you must press the Back button to save them.
tab.
tab.
icon.
Value
The name of the user to which Tag or Pass is bound.
If the device is not bound to a user, the eld displays
the text Guest
Displays the status of the device:
Yes
No
Device identi er. Transmitted in events that are sent to
the CMS