Agilent Technologies 7000 Series Operating Manual page 54

3 Installing Intuvo 9000 GC Column
To Replace an Intuvo GC Column
Bus door
Oven door
Front door
Intuvo torque driver
Figure 9.
5 Open the bus door and remove it by lifting the door vertically off its hinge
6 Lower the oven door.
7 Using the Intuvo torque driver, rotate all four column clamps off the column's
54
9000 GC front door, bus door, oven door, and Intuvo torque driver
pins.
retainer ring. (See Figure 10.)
7000/7010 Series TQ GC/MS Operating Manual