Agilent Technologies 7000 Series Operating Manual page 228

8 CI Maintenance
To Remove the CI Source Radiator from the 7010 Series TQ
2 Disconnect the green ground wire from the radiator. (See
3 Use a T-10 Torx screwdriver to loosen the two retained screws that secure
Figure 76.
228
the radiator to the analyzer and place the radiator in its storage container.
CI/EI XTR Source radiator
7000/7010 Series TQ GC/MS Operating Manual
Figure 76.)
Radiator screw
Radiator
Radiator screw
Green ground wire