Chapter 2
Installation
Mounting the UMI-7774/7772 in a Standard 19 in. Rack
Disconnect power before removing the UMI-7774/7772 from the rack.
Caution
National Instruments UMI-7774/7772 User Manual
To mount the UMI-7774/7772 in an EIA-standard 19 in. rack, you must use
the rack-mount kit (part number 778712-01) from National Instruments.
Complete the following steps to install the rack-mount kit.
1.
Fasten the rack-mount bracket to the back of the UMI-7774/7772 using
the captive screws on the bracket.
Figure 2-9. Fastening the Rack-Mount Accessory to the UMI-7774/7772
2.
Bolt the rack-mount accessory to a standard 19 in. rack.
L L
N A
T S
E N
T I T IO
U M
N N A
T R T R
IN S
2-12
ni.com