Table of Contents
Advertisement
1.
Insert one edge of the DIN rail into the deeper opening of the DIN rail clip.
2.
Press down firmly to compress the spring until the clip locks in place on the DIN rail.
Caution
from the DIN rail.
Mounting the cRIO-9035 on a Rack
NI offers the following rack-mount kits that you can use to mount the cRIO-9035 and other
DIN rail-mountable equipment on a standard 482.6 mm (19 in.) rack.
•
NI 9910 Sliding Rack-Mounting Kit, 779102-01
•
NI Rack-Mounting Kit, 781989-01
Note
You must order the NI DIN rail mount kit, 157254-01, in addition to a rack-
mount kit.
Mounting the cRIO-9035 on a Desktop
You can use the NI desktop mounting kit, part number 779473-01, to mount the cRIO-9035 on
a desktop.
What to Use
•
cRIO-9035
•
Screwdriver, Phillips #2
•
NI desktop mounting kit, 779473-01
–
Desktop mounting brackets (x2)
What to Do
Complete the following steps to mount the cRIO-9035 on a desktop.
2
Ensure that no C Series modules are in the cRIO-9035 before removing it
1
NI cRIO-9035 User Manual | © National Instruments | 31
Advertisement
Table of Contents
