Mounting The Backplane In A Standard 19-In. Rack - National Instruments Compact FieldPoint cFP-21 Series User Manual

Chapter 2 Installing Compact FieldPoint Hardware and Software

Mounting the Backplane in a Standard 19-in. Rack

cFP-21xx and cFP-BP-x User Manual
In order to mount the cFP-BP-x backplane in an EIA standard 19-in. rack,
you need the rack-mount kit. You can order the kit, part number
778615-01, from NI.
Figure 2-7. Dimensions of Compact FieldPoint Rack-Mount Kit,
Complete the following steps to mount the backplane in a rack:
1. Fasten the rack-mount bracket to the back of the cFP-BP-x using the
captive screws on the bracket. Refer to Figures 2-8 and 2-9.
Part Number 778615-01
2-8 ni.com