Belt Buckle - Cybex Platinum SIRONA Z i-SIZE User Manual

Hide thumbs Also See for SIRONA Z i-SIZE:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 8
SECURING THE CHILD
1. Rotate the seat to the boarding position (only possible when using the Base Z).
2. Press the Belt adjustment button (21) and pull both Shoulder belts (22) at the
same time to loosen them.
3. Undo the Belt buckle (23) by pressing the red button firmly.
4. The Buckle tongues (24) can now be attached to the indicated places on the
cover using the integrated magnets.
5. Put your child in the car seat with their buttocks at the back.
6. Place the Shoulder belts (22) directly over your child's shoulders.
7. Place both Buckle tongues (24) together and lock them in place in the Belt
buckle (23). You should hear an audible "CLICK".
8. If you are using a seat with a SensorSafe Clip, push the clip closed until you
hear an audible "CLICK" and slide the closed clip down towards the Belt
buckle (23).
9. Tighten the Lap belts (25) and then pull on the Central adjustment belt (26) to
tighten the Shoulder belts (22) until they rest snug against your child's body.
The harness should be fitted tight enough so that it is not possible to put a fold
��
in any of the straps.
10. When using the SensorSafe clip, position the clip directly below the shoulder
pads.
REMOVING AND REATTACHING THE SEAT COVER
The car seat cover consists of 4 parts. These are fastened to the car seat at
several places. Once unfastened, the individual parts of the cover can be removed.
To reattach the cover, follow the removal instructions in the reverse order.
Before you wash the Newborn inlay (4), the foam must be removed. There are
openings in the fabric for this purpose.
The cover may only be washed at 30°C with a delicate wash program otherwise
��
it may result in discolouration of the cover fabric. Please wash the cover
separately from other laundry and do not dry it in the dryer or in direct sunlight!
MANUFACTURER'S WARRANTY AND DISPOSAL REGULATION
CYBEX GmbH (Riedingerstr. 18, 95448 Bayreuth, Germany) gives you 3 years
warranty on this product. The warranty is valid in the country where this product
was initially sold by a retailer to a customer. The contents of the warranty and all
essential information required for the assertion of the warranty can be found on
our homepage: go.cybex-online.com/manufacturer-warranty-car-seats. If a
warranty is shown in the article description, your legal rights against us for defects
remain unaffected.
Please observe the waste disposal regulations in your country.
EN
9

Advertisement

Table of Contents
loading

Table of Contents