Strapping With Vehicle Seat Belt - Cybex Platinum SOLUTION Z i-FIX User Manual

16
20
1
32
18
17
CLICK!
19

STRAPPING WITH VEHICLE SEAT BELT

Place your child in the car seat. Pull the three-point belt right
!
out and feed it in front of your child towards the belt buckle (16).
WARNING! Never twist the belt.
Insert the belt tongue (17) into the belt buckle (16). It must
lock into place with an audible "CLICK".
Next, place the lap belt (18) in the lower belt guides (19) of
the car seat.
Now pull the diagonal belt (20) firmly to tighten the lap belt
(18). The tighter the belt sits, the better it provides protection
from injury. On the side of the belt buckle (16), the diagonal
belt (20) and the lap belt (18) must be inserted together in the
!
lower belt guide (19).
WARNING! The vehicle belt buckle (16) must never
cross the arm rest. If the belt system is too long, the car
seat is not suitable for use in this position in the vehicle.
In case of doubt, please consult the manufacturer of
your vehicle.
The lap belt (18) needs to be fed through the lower belt guides
(19) on both sides of the seat cushion (1).
NOTE! Teach your child from the start to always ensure that
the belt is tight and, if neccessary, how to tighten the belt
!
themselves.
WARNING! The lap belt (18) must run as low as
possible on both sides along your child's groin to have
optimum effect in the event of an accident.