Table of Contents
Advertisement
Operating the Main Menu (Cont.)
Operating the Main Menu (Basic Operation of the Main Menu)
Remote control unit
PAGE BACK button
Main menu
(Example: During video signal input)
Input line
Decoder (color system)
36
For projector's menus, the setting menu and the main menu are
available.
Here, we explain about the operation of the main menu. (see pages
36
MENU/ENTER
For the setting menu, refer to "Making Basic Settings" on page 33.
button
Cursor buttons
Submenu items
Source
Language
to 49)
Press the MENU/ENTER button.
The main menu is displayed on the screen.
Select an item with the cursor button
or
.
The selected item (displayed text) is shown in magenta color on
the screen.
Set (adjust) the item.
When you have selected DECODER or LANGUAGE,
Set it with the cursor button
* To finish the main menu, press the PAGE BACK button.
When you have selected an item on the submenu,
Press the MENU/ENTER button to display the submenu, then
set (adjust)
the item with the cursor buttons
*To return to the main menu, press PAGE BACK again. (To
finish the main menu from the submenu, press PAGE BACK
twice.)
About main menu display:
Line display:
The selected input-mode designation is
displayed. For input-mode designation,
"Y/C", "VIDEO", "Y, P
"COMPUTER 1" and "COMPUTER 2" are
available.
Source display:
The type of signal being input is displayed.
With this projector, unique designations are
previously given to specific horizontal and
vertical frequencies. This allows the source
selected under SOURCE (submenu item) to
be indicated. The source setting can be
selected from AUTO mode and dedicated
(forced) modes. When AUTO is selected, the
horizontal and vertical frequencies of a
signal being input are detected and the
matched designation is displayed in ( ).
Display example: "AUTO (NTSC)"
Therefore, be careful as the source display
does not always correspond to the indication
or type of the
For the unique designations for the specific
horizontal and vertical frequencies, see
pages 21 and 48.
Submenu item display:
PIXEL CLOCK : See page 39.
POSITION
: See page 40.
PICTURE
: See pages 41-43.
SOUND
: See page 44.
OPTIONS
: See pages 45-47.
: See pages 48 and 49.
SOURCE
Decoder (Color system) display: See
Language display
or
or
.
/B-Y, P
/R-Y",
B
R
input signal.
page 37.
: See page 38.
Advertisement
Table of Contents
