Note For Installing Camera Outdoor; Note For Silica Gel Bags - GeoVision GV-IP LPR-DL User Manual

Note for Installing Camera Outdoor

When installing the GV-IP LPR-DL Camera outdoor, mind the following:
1. Set the camera above the junction box to prevent water from entering the camera along
the cables.
2. Waterproof the PoE, power and any other cables with waterproof silicon rubber or the like.
3. The camera casing may be hot due to its IR LED. Make sure you unplug the power cable
and allow the camera casing to cool before handling the camera.

Note for Silica Gel Bags

The silica gel loses its effectiveness whenever the camera is opened. To prevent the lens
from fogging up, replace the silica gel bag every time you open the camera and conceal the
gel bag in the camera within two minutes of exposing it to open air.
viii