Installing The Camera - GeoVision GV-IP LPR-DL User Manual

1.4.2 Installing the Camera

IMPORTANT: To produce quality image and to avoid software recognition errors, make
sure you adhere to the guidelines as specified in GV-LPR2811-DL Camera Installation
Guide.
After you have read through the installation guides and chosen an installation site, follow the
steps below to install the camera.
1. Slide the sun shield cover onto the top of the camera. Adjust the position of the cover
before fully securing it with the 2 supplied short screws.
2. Mark the installation site and drill three holes for the screw anchors.
3. Insert the supplied screw anchors.
4. Secure the camera to the wall using the supplied screws.
Introduction
1
11