Advertisement
Available languages
Available languages
Service
a. Have your power tool serviced by
a qualified repair person using
only identical replacements parts.
This will ensure that the safety of the
power tool is maintained.
MACHINE-SPECIFIC SAFETY
INSTRUCTION
Safety warnings for drills and
screwdrivers
Use appropriate detectors to
determine if utility lines are hidden
in the work area or call your local
utility company for assistance.
Contact with electric lines can lead
to fire and electric shock. Damaging
a gas line can lead to explosion.
Penetrating a water line causes
property damage or may cause an
electric shock.
Switch off the power tool
immediately when the tool insert
jams. Be prepared for high reaction
torque that can cause kickback. The
tool insert jams when:
the power tool is subject to overload
or it becomes wedged in the
workpiece.
Hold the machine with a firm grip.
High reaction torque can briefly occur
while driving in and loosening screws.
Secure the workpiece. A workpiece
clamped with clamping devices or in a
vice is held more secure than by hand.
oKeep your workplace clean. Blends of
materials are particularly dangerous.
Dust from light alloys can burn or
explode.
Always wait until the machine has
come to a complete stop before
placing it down. The tool insert can
jam and lead to loss of control over
the power tool.
Avoid unintentional switching on.
Ensure the trigger is in the off position
before inserting battery pack. Carrying
the power tool with your finger on the
trigger or inserting the battery pack
into power tools that have the switch
on invites accidents.
Safety Warnings for
battery chargers
For indoor use only.
Double insulated.
Keep the battery charger away
from rain or moisture. Penetration of
water in the battery charger increases
the risk of an electric shock.
Do not charge other batteries.
The battery charger is suitable only
for charging the batteries that were
8
Advertisement
