Download Print this page

IKEA 702.329.02 Original Instructions Manual page 9

Advertisement

Available languages

Available languages

supplied with your power tool.
Otherwise there is danger of fire and
explosion.
Keep the battery charger clean.
Contamination can lead to danger of
an electric shock.
Before each use, check the battery
charger, cable and plug. If damage
is detected, do not use the battery
charger. Never open the battery
charger yourself. Have repairs
performed only by a qualified
technician. Damaged battery
chargers, cables and plugs increase
the risk of an electric shock.
Do not operate the battery charger
on easily inflammable surfaces
(e. g., paper, textiles, etc.) or
surroundings. The heating of the
battery charger during the charging
process can pose a fire hazard.
Children should be supervised to
ensure that they do not play with
the battery charger.
VIBRATION INFORMATION
Vibration level
The vibration emission level stated
in this instruction manual has been
measured in accordance with a
standardised test given in UL 62841 /
CSA C22.2 No. 62841. It may be used to
compare one tool with another and as
a preliminary assessment of exposure
to vibration when using the tool for
the applications mentioned in this
manual. However, using the tool for
different applications, or with different
or poorly maintained accessories, may
significantly increase the exposure
level.
An estimation of the level of exposure
to vibration should also take into
account the times when the tool is
switched off or when it is running but
not actually doing the job, as this may
significantly reduce the exposure level
over the total working period.
Protect yourself against the effects of
vibration by maintaining the tool and
its accessories, keeping your hands
warm, and organising your work
patterns.
ASSEMBLY
Before any work on the machine
(e.g. maintenance, tool change,
etc) as well as during transport and
storage, set rotational direction
switch to the centre position.
Unintentional actuation of the trigger
can lead to injuries.
Charging your screwdriver/drill
When the charger is connected to the
electricity supply, the red diode on the
screwdriver/drill lights up. The diode
9

Advertisement

loading