Project Properties Dialog - Sensors Tab - AMX MIO-R4 Operation/Reference Manual

Project Properties dialog - Sensors tab

Use the options in the Sensors tab of the Project Properties dialog (FIG. 24) to view/edit Channel/Level
and Port settings for Light Sensors, Motion Sensors, Battery Levels and Cradle Sensors associated with
the active panel file.
FIG. 24 Project Properties dialog - Sensors tab
The options in this tab include:
Project Properties dialog - Sensors tab
• Light Sensor:
• Motion Sensor:
• Battery Levels:
• Cradle Sensor
(MVP panels only):
TPDesign4 Touch Panel Design Software (v2.10 or higher)
Use these fields to specify the Level and Channel port/code assignments for the
on-board light sensor.
Use these fields to specify the Channel port/code assignments for the on-board
motion sensor.
Use these fields to specify the Level port/code assignments for the on-board bat-
tery charger.
Use these fields to set the Channel port/code assignments for the Cradle Sensor
on MVP panels. The channel will be turned on when the panel is docked (either in
the tabletop docking station or in the wall cradle).
Note: The cradle sensor uses the same device number as the MVP panel.
TPDesign4 Project Files
27