Preferences Dialog - Appearance Tab - AMX MIO-R4 Operation/Reference Manual

Program Preferences
Miscellaneous:
• Flush Pages On Save:
• Create backup copy:
• Use "Copy of" prefixes:
• Retain selected tool:
• Image Cache Size (MB): Use the up and down arrows to adjust the size of the image cache (default = 8
Undo / Redo Support:
• Enable the undo system: This option enables/disables the ability to undo actions. By default, this option is
• Number of undo levels:
• Change selection on
undo:
• Enable the redo system:
Reset:
Reset All:
OK:
Cancel:
Apply:

Preferences Dialog - Appearance tab

Select Edit > Preferences to open the Preferences dialog where you can set general program preferences
for TPDesign4. Click on the Appearance tab to customize display and grid settings for the Design View
window. The items in the Preferences dialog - Design View tab include:
Window:
• Initial Zoom:
• Gutter Color:
• Auto Stack New
Windows:
Grid:
Grid Style:
Grid Size:
218
When enabled, this option flushes system memory of any pages that were previ-
ously opened but now closed, when the project is saved successfully (default =
enabled).
This option saves a backup copy of the panel file to the backup folder every time
you perform a save operation.
This option automatically adds the prefix "Copy of" to any pasted pages and
popup pages, if a name conflict occurs. With this option unchecked, the user will
be asked to resolve the name conflict.
This option locks the selected tool (Selection Tool or Button Draw Tool). With this
option unchecked, the tool is reverted to the Selection Tool at the completion of
every button draw operation.
MB).
selected.
Note: Pressing OK or Accept after enabling/disabling the undo system will result
in a clearing of the undo/redo history.
Use the up/down arrows to change the number of undo actions allowed (default =
10000).
This option will alter to current selection and select the items that are effected by
the latest Undo / Redo action.
This option enables/disables the ability to redo actions. By default, this option is
selected.
Click to reset all options in the Application tab to their default settings.
Click to reset all options in both tabs to their default settings.
Click to save your changes and close the Preferences dialog.
Click to close the Preferences dialog, without saving any changes.
Click to apply any changes.
Click the down arrow to open a drop-down list of the zoom settings that can be
applied as the default initial zoom setting for all new Design View windows.
The Gutter is the area around the outer edge of the Design View windows. Click
the down arrow to open a palette used to set the default color for the gutter on all
new Design View windows.
Use this option to automatically stack new Design View windows directly on top of
each other, so that only the most recently created or opened page is visible
(default = enabled).
Select from the drop-down list of styles that the grid can be displayed in (Line,
Dashed Line or Dots).
Use the up/down arrows to set the default grid size (measured in pixels). The
range is 4 - 255, the default setting is 8.
TPDesign4 Touch Panel Design Software (v2.10 or higher)