TPDesign4 Project Files
Using The New Project Wizard
The New Project Wizard steps you through the process of creating a new Project file (also known as a
Panel file), complete with a start page. Use the New Project Wizard as a shortcut to starting new
TPDesign4 projects.
To launch the New Project Wizard, select File > New. To cancel the wizard at any point in the process,
click Cancel. The New Project Wizard is by its nature self-explanatory and intuitive, and consists of up
to three dialogs:
1. The first dialog to appear (New Project Wizard - Step 1) contains fields to allow you set up the
basics of your new project (FIG. 15).
FIG. 15
New Project Wizard - Step 1
Fill out this information and click Next to proceed.
Click Finish to close the wizard. If you close the wizard after step 1, you will have
created a project with a single page. Every project created will have at least one
page. You can add pages manually via the Panel > Add Page command.
2. The next dialog in the wizard (New Project Wizard - Step 2) contains fields for System-Generated
File Names (FIG. 16).
18
• Job Name:
Enter a name for the new project.
• Panel Type:
Click the down-arrow to view a list of supported panel types
• Resolution:
Click the down-arrow to select the target resolution for the project.
• Use System Generated
Click this checkbox to use a System Generated File Name for this
File Name:
project. See the System-Generated File Names section on
page 20 for details.
TPDesign4 Touch Panel Design Software (v2.10 or higher)