Configuring Dialing; Adjusting The Dtmf Level; Configuring Automatic Dialing; Table 3-17: Automatic Dialing Parameters - AudioCodes 405HD Administrator's Manual

3.3.4

Configuring Dialing

This section shows how to configure Dialing parameters. Only the parameters documented
in this section are applicable.
3.3.4.1

Adjusting the DTMF Level

Network administrators can adjust the DTMF level of the phone to suit personal
requirements.

To adjust the DTMF level using the Configuration File:
Open the Configuration File page (Management tab > Manual Update >

Configuration File) and configure the parameter using the table below as reference.
Parameter
[voip/audio/gain/dtmf_tone_signal_level]
3.3.4.2

Configuring Automatic Dialing

This section shows how to configure Automatic Dialing using the Web interface or the
Configuration File.

To activate automatic dialing using the Web interface:
1. Open the Dialing page (Configuration tab > Voice Over IP menu > Dialing).
Figure 3-27: Web Interface - Dialing - Automatic Dialing
2.
Configure the Automatic Dialing section parameters using the table below as
reference, and then click Submit.

To activate automatic dialing using the Configuration File:
Open the Configuration File page (Management tab > Manual Update >

Configuration File) and configure the parameters using the table below as reference.
Parameter
Activate
[voip/dialing/auto_dialing/enabled]
Administrator's Manual

Table 3-17: Automatic Dialing Parameters

Range: 1-32. Default: 16

Table 3-18: Automatic Dialing Parameters

Determines whether automatic dialing is enabled (i.e.,
phone number is automatically dialed when you
off-hook the phone).
[0] Disable (default)

[1] Enable

80
400HD Series for Skype for Business
Description
Description
Document #: LTRT-09943