Brother HL-S7000DN Service Manual page 55

Error message
Cover is Open
Close the Cartridge Cover.
Cover is Open
Close the Inner Back
Cover.
Cover is Open
Close the Optional Output
Tray Cover.
Duplex Disabled
Close the Back Cover of
the machine.
DX Lever Error
Set the Duplex Lever to the
correct position according
to paper size used.
Ignore Data
Press Cancel
Ink Low
The cartridge is nearing the
end of it's life. Have a new
cartridge available to avoid
printing interruptions.
Insufficient Ink
Ink level is too low to print.
Install anew Brother
Genuine ink cartridge.
Jam A Tray 1
Remove the jammed paper
from Tray 1.
Jam A Tray 2
Remove the jammed paper
from Tray 2.
Jam A Tray 3
Remove the jammed paper
from Tray 3.
Jam A Tray 4
Remove the jammed paper
from Tray 4.
Jam B Inside
Open the Top Cover and
MP tray. Then Release the
green levers. Follow step B
to remove jammed paper.
Problem
Cartridge cover sensor detected that
it is at open state.
Chute cover sensor detected that it is
at open state.
When ejecting the paper to the
optional output tray, the back cover of
the optional output tray is open.
During 2-sided printing, it was
detected that the back cover is open
state.
During 2-sided printing, the paper
size switching lever of 2-sided tray
and paper size from the driver are not
identical.
Undecodable PS data is received.
Ink cartridge almost reaches time for
replacement.
Ink cartridge reached time for
replacement.
After paper feed from tray 1, the
registration front sensor does not turn
to the paper feeding state.
After paper feed from tray 2, the
registration front sensor does not turn
to the paper feeding state.
After paper feed from tray 3, the
registration front sensor does not turn
to the paper feeding state.
After paper feed from tray 4, the
registration front sensor does not turn
to the paper feeding state.
After registration front sensor
detected paper feeding while paper
feed sensor is at no paper state, even
if a certain amount of paper is fed,
print starting sensor does not change
to paper feeding state.
2-27
Error
Refer to:
codes
6002 2-72
6003 2-73
9901 2-102
9902 2-103
9803 2-102
9804
9802 2-101
--- 4.4.1
5301 2-67
5302
5401 2-67
5402
7301 2-80
7302 2-81
7401 2-81
7402 2-82
7501 2-82
7502 2-83
7601 2-83
7602 2-84
7001 2-75
7002
Confidential