Brother HL-S7000DN Service Manual page 144

■ Paper jam at the 2-sided tray
<User Check>
- Turn back the paper loaded in each paper tray or change the orientation of the paper by
180°.
- Check if the thickness of the paper is 60 to 105 g/m
- Fan the stack of paper well and reinsert the papers into each paper tray.
Step
1 Foreign object in the 2-sided
paper feed system
2 Coming off of eject actuator
3 Back cover failure
4 Paper eject sensor failure
5 Paper feed PCB failure
6 Main PCB failure
Cause
2-116
2
.
Remedy
Remove the foreign object.
Re-assemble the eject actuator.
Replace the back cover.
Replace the paper eject ASSY.
Replace the paper feed PCB ASSY.
Replace the main PCB ASSY.
Confidential