Brother HL-S7000DN Service Manual page 454

(12) Hold the Hook at the rear side of the Ink head wiper ASSY and pull it to the front to
release it.
(13) Lift the entire Ink head wiper ASSY to the rear side diagonally, release the Hook at the
other side, and remove the Ink head wiper ASSY.
<A view>
Hook
(14) Attach a new Ink head wiper ASSY, close the Top cover, and insert the AC cord to the
machine to return it to the initial state.
Note:
When the Maintenance mode 18 is executed, the machine cannot recognize the positions
of the glass face and Head wiper. For this reason, you need to pull out and insert the AC
cord as explained in the procedures to return the machine to the initial state. If the machine
does not return to the initial state, some parts might get broken during operation.
A view
Ink head wiper ASSY
Fig. 7-4
7-5
Ink head wiper ASSY
Confidential