Brother HL-S7000DN Service Manual page 44

Error
Problem
Codes
3601 Paper eject switching sensor
detected that either optional
output tray is selected or paper
eject switching is not set to
optional output tray.
3700 ---
3701 Serial communication error
occurred between RIP CPU
when PC printing, internal
printing, and storage printing
etc. was performed.
3702 Serial communication error
occurred between RIP CPU
when RIP CPU is activated.
3703 Serial communication between
RIP CPU occurred after watch
dog timer time out occurred.
3801 Error occurred in the external
temperature sensor.
3802 Error occurred in the external
humidity sensor.
3900 ---
3A00 Communication error occurred
between the engine and control
on the main PCB.
3B00 Error occurred when main PCB
ASSY is accessing to DRAM.
3C00 ---
3D00 ---
3E00 ---
3F00 ---
4000 ---
4200 ---
4300 ---
4400 ---
Refer Error
to: Codes
2-63 4500 ---
4600 ---
4700 ---
4800 ---
4900 ---
2-63 4A00 ---
4B00 ---
4C00 ---
4D00 ---
2-63 4E00 ---
4F00 ---
5000 ---
2-63 5001 The use number of sheets for
paper feeding kit MP reached
the end of life. (Printing does
not stop.)
2-64 5002 The use number of sheets for
paper feeding kit 1 reached the
end of life. (Printing does not
stop.)
2-64
5003 The use number of sheets for
paper feeding kit 2 reached the
end of life. (Printing does not
stop.)
2-64
5004 The use number of sheets for
paper feeding kit 3 reached the
end of life. (Printing does not
stop.)
2-64
5005 The use number of sheets for
paper feeding kit 4 reached the
end of life. (Printing does not
stop.)
5100 Waste dot count detected that
waste ink tank almost reached
the time for replacement.
5200 Waste ink full sensor detected
that waste ink tank reached
time for replacement.
2-16
Problem
Confidential
Refer
to:
2-65
2-65
2-65
2-65
2-65
2-66
2-66