Brother HL-S7000DN Service Manual page 155

6) Fastener two Taptite bind B M4x10 screws at Paper dust cover upper.
Taptite bind B M4x10
Paper dust cover upper
7) Install Registration outer chute. (Fit to a round hole at the back side)
Note:
Easy to do when you insert in the order left, right. Note that do not enter the
Bosses to Holes on the front side. OK if the chute can be closed normal position.
Hole
Hole on the
front side
Hole
Fig. 2-14
Boss
Fig. 2-15
2-127
Taptite bind B M4x10
Registration outer chute
Boss
Hole
Confidential