Brother HL-S7000DN Service Manual page 45

Error
Problem
Codes
5301 Pre-coat ink count detected that
almost reached the time for
replacement.
5302 Ink count detected that almost
reached the time for
replacement.
5400 ---
5401 Pre-coat ink full sensor
detected time for replacement
of the pre-coat ink.
5402 Ink full sensor detected time for
replacement of the ink.
5406 Water full sensor detected time
for replacement of the water.
5500 ---
5502 Communication error with ink
cartridge IC.
5600 ---
5602 Accumulated hour of use of ink
cartridge exceeded usage
regulation time.
5700 ---
5702 Error occurred when ink
cartridge is writing to IC.
5800 ---
5801 Pre-coat needle sensor
detected error in needle
insertion to the cartridge
pre-coat section.
5802 Ink needle sensor detected
error in needle insertion to the
ink cartridge section.
5900 ---
Refer Error
to: Codes
2-67 5902 Data unlikely to be available
with genuine cartridge was
received.
2-67 5A00 ---
5A02 The number of times of ink
cartridge insert/remove
exceeded its use limit.
2-67 5B00 Registration front sensor
detected that the size of printing
paper is smaller than the
specified size.
2-67 5B02 Communication error was
detected with ink cartridge IC
while printing.
2-68
5C00 Registration front sensor
detected that the paper size for
printing by specifying DDL (DL
Long Edge), is smaller than the
2-68
specified size.
5C02 During printing, writing into ink
cartridge IC failed.
2-68
5D00 ---
5E00 ---
5F00 ---
2-69 6000 ---
6001 Top cover sensor detected that
it is at open state.
2-69 6002 Cartridge cover sensor
detected that it is at open state.
6003 Chute cover sensor detected
that it is at open state.
2-69
6100 ---
6200 ---
6300 ---
6400 ---
2-17
Problem
Confidential
Refer
to:
2-70
2-70
2-70
2-71
2-71
2-71
2-72
2-72
2-73