Brother HL-S7000DN Service Manual page 453

(3) Release the Hook to remove the Pick-up roller from the PF drive shaft.
(4) Release the Hook to remove the Separation roller from the Paper feed shaft.
Paper feed frame unit
■ Ink head wiper ASSY
(5) Insert the AC cord to the machine, enter the initial state of the maintenance mode, and
press the 1 and 8 buttons in this order. "PlatenPosition" is displayed on the LCD.
(6) Press the or
the button. Check that "BLACK" is displayed on the LCD to replace the Ink head wiper
ASSY.
(7) Press the OK button. The glass face goes down.
(8) Press the button. "WipeGlassSurface" is displayed on the LCD.
(9) Press the or
(10) Press the or
button. Pull the Open lever, open the Top cover, and check that the Ink head wiper ASSY
is moved to the replacement position.
(11) Pull out the AC cord from the machine.
<A view>
A view
PF drive shaft
Paper feed shaft
Fig. 7-3
button to display "WipeGlassSurface" on the LCD, and press
button to display "BlackWipe" on the LCD, and press the
button to display "NOZZLE WIPE POS" on the LCD, and press the OK
7-4
Pick-up roller
Separation roller
Hook
button.
Confidential