Brother HL-S7000DN Service Manual page 128

■ Error code 9701
Size Error DX
Press Cancel. Specify the correct paper and load the same size paper as the
Printer driver setting.
During 2-sided printing, paper size, which does not support 2-sided printing, was set by the
driver.
<User Check>
- Set the paper size of the specified paper tray to the size with the prescribed size for 2-sides
printing.
Step
1 Size SW PCB failure
2 Main PCB failure
■ Error code 9702
Size Error
Specify the correct paper size for Tray 1.
When receiving print command from tray 1, driver instructed non-support size.
Error code 9703
Size Error
Specify the correct paper size for Tray 2.
When receiving print command from tray 2, driver instructed non-support size.
Error code 9704
Size Error
Specify the correct paper size for Tray 3.
When receiving print command from tray 3, driver instructed non-support size.
Error code 9705
Size Error
Specify the correct paper size for Tray 4.
When receiving print command from tray 4, driver instructed non-support size.
<User Check>
- Adjust the paper size of the print data to the size inside the prescribed size.
Step
1 Size SW PCB failure
2 Main PCB failure
Cause
Cause
2-100
Remedy
Replace the size SW PCB ASSY.
Replace the main PCB ASSY.
Remedy
Replace the size SW PCB ASSY.
Replace the main PCB ASSY.
Confidential