Brother HL-S7000DN Service Manual page 349

1.5 Replace the USB Storage Memory
Customer's data (such as secure data, macro data, and font data) are stored in the USB
storage memory. When using new USB storage memory, the customer needs to copy these
data to the new USB storage memory again. However, after a serial number is set as
explained in 1.4 in this
memory. Replace the USB storage memory according to the need.
1.6 Clock Setting
(1) If the machine is in the maintenance mode, press the 9 button twice to return to the ready
state.
(2) Press the Menu button, and then press the
the LCD and press the OK button.
(3) Press the
(4) Enter the current year, month and date using the ten-key pad.
(5) Select the desired display method from "12h clock"or "24h clock" pressing the
button, and press the OK button.
(6) Enter the current time using the ten-key pad. (If "12h clock" is selected, select AM or PM.)
Note:
Set the time after the machine is returned from the repair so that the periodic flashing
can be done within the specified period of time.
Chapter, all the data can be inherited by replacing the USB storage
or button to display "Date & Time" on the LCD and press the OK button.
or button to display "General Setup" on
4-6
or
Confidential