Initial Charge Flag Setting; Ink Flushing / Discharge; Ink Discharge - FujiFilm Frontier-S DX100 Service Manual

5.6.2 Initial Charge flag setting

1. Select 1. Adjust / Maintenance
flag setting.
2. When flag sets, select the
3. When flag resets, select the
Figure 5-97. Initial Charge flag setting screen
DX100 Service Manual

Ink System Maintenance
Flag Set, and click [Run].
Flag Reset, and click [Run].

5.6.3 Ink Flushing / Discharge

Initial Charge This section describes Ink Discharge Ink Discharge / Flushing of the drain path.

When removing the ink supply related parts
Execute the Ink Draining to prevent ink from leaking.

When transporting the printer or storing it over long periods of time
 Carry out the cleaning of the print head and the ink path with the cleaning
fluid so as to prevent the ink from thickening.

5.6.3.1 Ink Discharge

Make sure to observe the following precautions before starting Ink
C A U T I O N
Discharge.



1. Select
Discharge.
2. Select the
3. Install the Draining Cartridges in the printer.
4. The Ink Discharge starts.
5.6Ink System Related Adjustment
(P. 273)
Do not unplug the printer AC cable during Ink Discharge.
Do not unplug the USB cable that connects the printer to the computer
during Ink Discharge.
Do not open the exterior covers during Ink Discharge.

1. Adjust / Maintenance Ink System
Discharge Only, and click [Run].
272
(P. 272)
Maintenance Ink Flushing /