Maintenance Cartridge Cover - FujiFilm Frontier-S DX100 Service Manual

4.5.2.11 Maintenance Cartridge Cover

1. Remove the Top Cover. (P.97)
2. Remove the Upper Cover. (P.100)
3. Remove the Rear Frame. (P.101)
4. Remove the Right Frame. (P.102)
5. Remove the Front Cover. (P.100)
6. Remove the heater upper cover.
("4.5.8.3 Left Heater Duct/Right Heater Duct" Step5
7. Remove the heater lower cover.
("4.5.8.3 Left Heater Duct/Right Heater Duct" Step6 (p189)
8. Remove the Right Heater Duct.
("4.5.8.3 Left Heater Duct/Right Heater Duct" Step10
9. Disconnect the FFC from the connector (CN402) of the Main Board.
10. Release the FFC from the two clamps.
11. Peel off the FFC.
Double-
sided tape
Main Board
Figure 4-31. Removing the Maintenance Cartridge Cover (1)
DX100 Service Manual
(p189))
to Step 7 (p189))
(p190))
Clamp
Clamp
Double-
sided tape
12. Release the Right Ink Tube from the clamps and two tabs of the Maintenance Cartridge
Cover.
13. Remove the decompression tube from the groove of the Maintenance Cartridge Cover.
14. Remove the FFC from the Maintenance Cartridge Cover.
Right Ink
Tube
Clamp
Tabs
FFC
CN402
Figure 4-32. Removing the Maintenance Cartridge Cover (2)
4.5Disassembly and Assembly Procedure
Groove
Maintenance
Cartridge Cover
FFC
Decompression tube
103
Double-
sided tape