Table of Contents Before Use ����������������������������������������������������������������������������������� 3 Notes on Disposing of the Printer ������������������������������������������ 3 Part Names ���������������������������������������������������������������������������������� 3 Installing the INSTAX MINI LINK App ������������������������������������� 4 Charging the Battery ���������������������������������������������������������������� 4 Charging status indication with the LED ��������������������������������������4 Loading/Unloading the INSTAX MINI™ Instant Film Pack ����������������������������������������������������������������������������������������������...
1-800-461-0416. Rear For proper disposal in Latin America at product end-of-life, please contact your local FUJIFILM distributor or dealer for disposal instructions. Do not attempt to remove the built-in battery. Injury may result. Read “IMPORTANT SAFETY NOTICE” (Page 13 ) for safety use.
Connect the printer with a USB AC adapter supplied with your information on system requirements� Smartphone (not included with INSTAX MINI LINK 2 printer) using Scan to download the INSTAX MINI LINK Smartphone the supplied USB cable, then connect the USB AC adapter to an indoor power outlet.
For details, refer to the instructions and warnings on the package of FUJIFILM INSTAX MINI Instant Print Film. The INSTAX MINI LINK 2 Smartphone Printer is designed for use with INSTAX MINI instant print film only. Loading the INSTAX MINI Instant Film Pack...
Start the downloaded INSTAX MINI LINK Turning on/off the Printer Smartphone App� Press and hold the Power button for approximately 1 second to turn the printer on or off. Turning the printer on lights up the LED. Click through the below pop-up windows to set up If no operation occurs for 5 minutes, the printer turns off the printer�...
Page 7
Note If your Bluetooth settings are switched off, the following screen appears. In this case, select [INSTAX MINI LINK 2]. Set up the Bluetooth connection between your Smartphone and the printer� [Bluetooth connection] can also be set in the process of printing.
Page 8
Set up for a four-digit password� Set up Print with video download settings and tap [OK]� Quick instructions are displayed� Read the You are now ready to use the printer� To select an instructions and tap [Let’s Play! →]� image to print, click the Simple Print button on the home screen and select an image from your photo roll�...
When the film has been ejected (the printer stops When the Printer and Your Smartphone Are Already making a sound), grasp the edge of the film, then Connected take it out� Confirm the number of images remaining in your Press and hold the Power button for approximately INSTAX MINI instant film pack on the Smartphone App 1 second to turn the printer on�...
or swipe the image up on the screen to print Reprinting an Image your image� You can reprint the image you last printed by using the Reprint After a slight transmission delay, the printer starts printing. motion sensor function. You can also select the number of images to print during Turn the printer over with the film ejection slot facing down and image transfer.
Controlling the INSTAX MINI LINK App with Controlling Zoom and Shutter When Using the the Angle of the Printer and the Power Button INSTAX Camera on the App Tilt the printer forward to zoom in. When this printer is linked with the App on your Smartphone or tablet, you can control the App by tilting the printer using the Smartphone App linked function.
3-color exposure with OLED be a malfunction. If the problem persists even after taking action, Film used FUJIFILM INSTAX MINI Instant Film (sold please contact the Fujifilm service center for repair in your country separately) or visit the website below. https://instax.com/mini_link_2/en/support/faq/ Image size 2.4 in x 1.8 in/62 mm ×...
WARNING Never attempt to take this product apart� You may be injured� All repairs should be handled solely by Fujifilm� Injury may result from attempts to self-assess or repair this printer� If this product is dropped or damaged so that the inside is showing, do not touch it�...
This printer uses INSTAX MINI instant print film, sold separately. 1. Do not open the film door until you have used up the the See FUJIFILM INSTAX MINI instant film pack use instructions. loaded instant film pack� Doing so will expose the remaining...
■ Wireless data (images) may be intercepted by third parties� FUJIFILM Corporation and its affiliates are not responsible for intercepted transmissions, or for unintended image uses. ■ Do not use the device in locations subject to magnetic fields, static electricity, or radio interference�...
Page 16
• Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by Fujifilm responsible for compliance could void the user’s authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
Page 17
Bluetooth SIG, Inc., and any use of such marks by Fujifilm is under license. Independent JPEG Group (IJG) Licenses The software used in the INSTAX MINI LINK 2 Smartphone Printer is based in part on the work of the Independent JPEG Group.