[Initialize Nvm]; [Initialize Print Meter]; [Clear Stored Jobs]; [Clear Forms] - FujiFilm ApeosPrint C325 dw Reference Manual

[Initialize NVM]

Initialize memory (NVM). After performing this setting and restarting the machine, all the machine
settings are reset to their factory default values.
[User App Settings]
Deletes the added widget applications.
[System Settings]
Resets the system settings to the factory default state.

[Initialize Print Meter]

Resets the print meter count.

[Clear Stored Jobs]

Clears print jobs saved using the stored print feature.

[Clear Forms]

Delete forms stored in the machine.

[Toner Cartridge]

Specify the toner cartridge to be used.
[Non-Genuine Toner]
Enable this function when you need to continue using the product even when the time has come to
replace the toner cartridge.
Important
 Once Non-Genuine Toner mode is enabled, it cannot be disabled.
 Quality is not guaranteed when using this mode. Therefore, the designated functions and performance
may not be achieved with this mode. Continuing using the product in this state may cause a printer
malfunction.
 In Non-Genuine Toner Mode, "[End of Drum Life]" (P.68) settings will be ignored. Also, toner and drum
cartridge remaining content levels will not be displayed.

[Adjust Altitude]

If the machine is installed in a location with a high elevation, specify the altitude.
When the altitude is correctly selected, optimum printing quality is attained, and the remaining
amount of toner is correctly displayed.

[Clear Job History]

Clears the job history of all finished jobs.
6.10 [Maintenance]
63