Appendix E Serial Over Lan; Hardware Setup - American Megatrends MegaRAC G3 User Manual
American megatrends megarac g3 controllers: user guide
Hide thumbs
Also See for MegaRAC G3:
- Brochure (4 pages) ,
- Quick install manual (2 pages) ,
- Datasheet (2 pages)
Table of Contents
Advertisement
Appendix E
Hardware Setup
You can use an external serial port connector and null modem cable to setup the
MegaRAC G3 to perform Serial over LAN operations. To do this, you must have an
external 9-pin serial port connector and cable plugged into the MegaRAC G3 card's
serial port connector at JP2. Once the external 9-pin serial port connector is installed and
secured to the chassis, attach the null modem cable as illustrated below:
The USB cable must be connected
from the MegaRAC G3's USB port
to the host system's USB port
Host system's
USB port
Serial Over LAN
MegaRAC G3
(I/O shield view)
Host system's
external serial
port
The null modem cable must be
connected from the MegaRAC G3's external
serial port connector to the host system's
external serial port connector
MegaRAC G3 external
9-pin serial port connector
USB
Appendix E : Serial Over LAN 131
Cont'd
Advertisement
Table of Contents
