Configure Group - American Megatrends MegaRAC G3 User Manual

Configure Group

You can left click on the Configure menu item from the menu bar. The following table
gives you a brief description of each menu item. Each menu item is explained in more
detail further in this section.
Function
Users
Network
Firewall
Alert
Notification
Date & Time
Serial Port
SSL Certificate
PMCP File
Upload
IPMI
Configuration
Server OS
Monitoring &
Recovery
Description
This menu item allows you to administer users that can access the MegaRAC
G3 and host system.
This menu item allows you to configure the network parameters of the
MegaRAC G3.
This menu item allows you to allow and restrict the IP addresses that can
access the MegaRAC G3.
This menu item allows you to configure how alerts are sent.
This menu item allows you to configure the time on the MegaRAC G3 card.
This menu item allows you to configure Serial Over LAN access on your
MegaRAC G3 card.
This menu item allows you to upload a Digital Certificate and Private Key to
the MegaRAC G3 card.
Note:
The MegaRAC G3 does not support pass-phrase encrypted
certificates.
This menu item allows you to upload a platform management file for your
motherboard/ server board.
This menu item allows you to configure the MegaRAC G3 card to read data
from an onboard baseboard management controller (BMC) on the
motherboard/ server board.
This menu item allows you to configure operating system monitoring and
recovery methods.
Chapter Four : Using Your MegaRAC G3 83