American Megatrends MegaRAC G3 User Manual page 122

G3ConfigApp,
Continued
Step Description
3 If you are running the G3ConfigApp program from a remote system, select the second radial button
labeled 'I want to connect to a G3 on the network'. Type in the MegaRAC G3 card's IP address in the
field to the right of Card IP. Type in your user name and password in the appropriate fields and left click
on the Ok button.
Note: You must know the
program from a remote system. Run the G3Seek program to find the
address.
4 The following G3ConfigApp Dialog window appears:
The G3ConfigApp Dialog window allows you to manage users, configure the network, flash the
MegaRAC G3 card's firmware and perform advanced configurations.
114 MegaRAC G3 User's Guide
MegaRAC G3
card's IP address before running the
G3ConfigApp
MegaRAC G3
card's IP
Cont'd